Services > Residential
Pool Filter Cleaning in Austin, TX
A dirty filter is one of the most overlooked problems in pool maintenance. When your filter is clogged, water can’t circulate properly, chemicals don’t distribute evenly, and algae gets the opening it needs.
In Austin, pollen, live oak debris, and hard mineral-heavy water put filters under more stress than most homeowners expect. Deep Blue Pools services all filter types as a standalone service or an add-on to your weekly plan.
Call for ServiceOur Filter Cleaning Pricing
Filter Clean – $150 Includes cleaning, degreasing, re-charging filter media, and inspection of all internal and external parts.
Filter Clean + Equipment Check – $200 Everything in the filter clean, plus an in-depth check of all pool equipment. This is a good option if it’s been a while since your equipment was last looked at or if you’ve been noticing anything off with your pool’s performance.
Filter Types We Service
Deep Blue Pools services all three major filter types: sand, cartridge, and DE (diatomaceous earth). Each one works differently and requires a different cleaning approach. If you’re not sure what type of filter you have, we’ll identify it when we arrive and take it from there.
We backwash sand filters to flush out trapped debris and restore proper water flow. Sand media typically needs to be replaced every five to seven years.
We remove, rinse, and deep clean cartridge elements to clear out debris, oils, and mineral buildup. Cartridges should be cleaned every one to three months depending on pool usage and Austin’s pollen load.
We backwash and recharge DE filters with fresh diatomaceous earth to restore their fine filtration capability. DE filters are the most thorough option but require regular attention to perform properly.
How Do I Know My Pool Filter Needs Cleaning?
Most Austin homeowners don’t think about their filter until something goes wrong. Here are the signs it’s time for a cleaning:
- Your water is cloudy despite balanced chemicals
- Your filter pressure gauge is running higher than normal
- Your pump sounds like it’s working harder than usual
- You’re getting more algae growth than expected
- It’s been three months or longer since your last filter cleaning
Ready to start your pool service?
Let's get you a free service quote before we get started.
Frequently Asked Questions
(FAQs)
Yes. A clogged filter restricts water circulation, which means chemicals aren’t distributing properly and algae has an easier time taking hold. A neglected filter is one of the most common causes of green pools in Austin.
Backwashing reverses water flow through the filter to flush out trapped debris and is part of routine maintenance. A full cleaning goes deeper, removing and inspecting filter components, clearing out mineral buildup, and recharging the media where needed.
Deep Blue Pools charges a flat rate for filter cleaning.
A standard filter clean is $150 and includes cleaning, degreasing, re-charging the filter media, and a full inspection of internal and external parts.
For $200 you can add an in-depth equipment check covering all pool equipment, which we recommend if it’s been a while since your last service.
More often than most homeowners expect. Cartridge filters should be cleaned every one to three months, and Austin’s cedar and oak pollen seasons can push that closer to monthly. Sand and DE filters need to be backwashed regularly and deep cleaned at least once or twice a year. If your pressure gauge is reading high, don’t wait to contact us!
Additional Services
Weekly Cleaning Services
Consistent, scheduled pool care every week including surface skimming, brushing, vacuuming, chemical balancing, and equipment checks.
Green to Clean Services
We treat and recover green, algae-filled pools back to clear, swimmable water. Pricing is quote-based depending on the condition of your pool.
Equipment Repairs
We diagnose and repair pool pumps, heaters, salt cells, and automation systems across Austin and surrounding suburbs.
